This is the heavy duty reusable applicator gun that is required for dosing our 300cc MSE Paste tubes. It is a standard gun that accepts 3 tab paste and gel tubes. To use simply insert tube into gun and twist ¼ turn to tighten. This gun must be purchased separately from the paste.

Detailed Instructions For Use:

To mount tube – Holding the pistol grip vertically, turn hooked depressor rod to 3:00 and pull all the way back. The circular depressor at the tip should be flush with the top of the cap section. Fit notches on flat end of tube into the corresponding grooves on side of cap section and screw until secure. Turn hook to 12:00 and pull trigger until depressor makes contact with top of tube.

To use mounted tube – Carefully pull trigger until a click is heard, this should deliver 5 cc of paste. If the trigger continues past all 3 clicks until it will not go back any further, this is called a full pull. A full pull will deliver 15 to 20 cc.

MSE paste should be delivered to the back of the animal’s throat to insure that it will be swallowed.   You will see the applicator in the pull down menu at the bottom of the shopping cart page after you click the 'Buy Here' button below!

FREE Shipping